Jump to 0 top | 1 navigation | 2 content | 3 extra information (sidebar) | 4 footer | 5 toolbar


Content

Musical Instrument Repair in your neighborhood!

Sometimes your guitar just will not sound right. Since guitars are usually made out of wood, it is affected by changes in temperature and humidity. A guitar that is not periodically adjusted properly will never live up to its full potential.

Intonation: Poorly adjusted intonation can cause a guitar to sound out of tune. It will make your guitar to sound messy when playing open chords, or sound slightly out of tune when you play higher up on the neck. Once you develop a good ear, this will drive you crazy. You can easily find a repairperson on Repairfinders.com to fix this for you quickly.

Intonation on a guitar should be adjusted if you ever change the gauge (thickness) of strings you use, if you change the action (distance between string and fret board) and at least twice a year (winter/summer). Some people suggest checking every time you change strings, although this is probably not necessary.

Intonation on an electric guitar is adjusted by moving its bridge saddles forward or backward. A bridge saddle is the piece of metal on the bridge that the string rests on. These can be adjusted with a small screwdriver (some guitars use an Allen wrench.) Your goal when setting the intonation is to make an open string sound exactly the same as the 12th fret on that string. In order to do this you will need an electric tuner.
In theory, the distance from the nut to the 12th fret should be the same as the distance between the 12th fret and the saddle. The 12th fret is supposed to be the halfway point. In reality, when we press down on the 12th fret, the string stretches, so it will generally sound a slightly higher pitch. To offset this annoying bit of physics we must adjust the ‘length’ of the string by moving the bridge saddles. If you move the bridge saddle back, you will increase the length of the string, therefore the guitar will sound less sharp when you fret notes.

If you are confused, forget about what I told you for a second, and follow the simple directions below or hop onto Repairfinders.com and have a qualified professional look at this for you.

Hit the 12th fret harmonic on your Low E-string. (You do this by lightly touching -not pressing- the string just above the fret. Chances are you probably knew that already.) Then press your finger down and play the 12th fret naturally. Your tuner (or your ear) will probably tell you that the two notes are (at least) a little out of tune.

THE BASIC RULE FOR SETTING INTONATION
If the 12th fret (pressed) sounds sharper (higher in pitch) than the harmonic, move the saddle back (away from the neck and pickups) and turn the screw clockwise.
If the note sounds flat, (lower in pitch) compared to the harmonic, move the saddle forward (toward the pickups)

Very Important: Remember to tune the string back to E each time you make an adjustment, before checking the intonation again. Often enough, the screws need to be adjusted very little. A tiny turn can make a big difference so start slow. Once you have properly intonated one string move to the next, until you are done with all six strings. The whole process rarely takes more than a half hour once you get used to it, but it may take a little longer at first, so hang in there. Once you are able, you will be proud of yourself.

Also, remember that the guitar, by its very nature, is an imperfect instrument. It is impossible to adjust intonation 100% perfectly. This might be obnoxious if you have an incredibly good ear, but you will just have to get used to it or give up the guitar.

It will be easier to get good intonation from your guitar if you use heavier gauge strings. If you use anything below, gauge .010 strings you may have problems. Personally, I use gauge .011 stings. Some people have trouble playing with heavy strings, but I swear, once you get used to them you will never go back. I strongly recommend using at least gauge .010

Also, do not adjust the action of your guitar or the truss rod after fixing your intonation. You would just have to do it all over again. If you need to adjust these things, do it first. These are other factors that affect the intonation of your guitar. If you use light strings, you may need to move the saddles back further, the same holds true if your strings are far from the fret board.

You must always keep your instrument finely tuned if you wish to receive many years of wonderful music from it. This is only an example of how easily someone in your area can assist you. However, no matter what kind of instrument you have, or whatever problem you may be experiencing, do not fear! On Repairfinders.com, it will take you only a couple of minutes to find a local business in your area to fix your guitar, piano, flute, saxophone, or any other instrument! So what are you waiting for? Jack is over and out.

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings

How much do you know about architects?

How much do you know about architects? Well if it is not much, pay attention because you are going to learn a lot! Architects design houses and buildings. They plan offices and apartments. They design schools, churches, and airport terminals. Their plans involve far more than a building’s looks. Buildings must be safe and strong. They must also suit the needs of the people who use them. Architects look at all these things.

 

 

The architect and client first discuss what the client wants. The architect sometimes helps decide if a project would work at all or if it would harm the environment. The architect then creates drawings for the client to review. They may be involved in all stages of the construction of a building.

If the ideas are OK, the architect draws up the final plans. These plans show how the building will look and how to build it. The drawings show the beams that hold up the building. They show the air-conditioner, furnace, and ventilating systems. The drawings show how the electricity and plumbing work. Architects used to use pencil and paper to draw their plans. Today, more and more architects are using computers. Architects generally work in comfortable conditions. They spend most of their time in offices. However, they spend some time at building sites to see how projects are going.

Architects may feel stressed sometimes. Most architects work 40 hours a week, but they may need to work nights and weekends in order to meet deadlines.

Architects must be licensed before they can practice. In order to get a license: 1) You need a degree in architecture. Courses include architectural theory, building design, math, and science. 2) You must finish an internship. 3) Finally, you must pass all sections of a license exam. Architects sometimes take new classes to keep their skills fresh.

Architects must be able to visualize things and communicate well visually. Art classes are very helpful in doing this. Speaking, writing, and creativity are also important. Architects should be computer literate.

 

 

The middle half of all architects earned between $49,780 and $83,450 a year in 2006. The lowest-paid 10 percent earned less than $39,420. The highest-paid 10 percent earned more than $104,970 a year.

Architects held about 132,000 jobs in 2006. Most jobs were in small architecture firms. About 1 in 5 was self-employed. This means they practiced as partners in a firm or on their own. Some worked for builders or government agencies. To find the best architects go to Repairfinders.com. On repairfinders.com, you will find qualified professionals in your area that can assist you in the remodeling or upgrading of your home, or office. All it takes is a couple of minutes! Jack is over and out.

 

 

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings

All you will ever need to know about Appliance Repair.

Home appliance repairers, also known as in-home service professionals, install and repair home appliances. Some repairers work on small appliances such as microwave ovens and vacuum cleaners. Others specialize in major appliances such as refrigerators, dishwashers, washers and dryers, and window air conditioning units. (Workers whose primary responsibility is the installation and repair of heating and central air conditioning units are covered in a separate Handbook statement on heating, air conditioning and refrigeration mechanics and installers-although some worker responsibilities may overlap.) Home appliance repairers install household durable goods such as refrigerators, washing machines, and cooking products. They may have to install pipes in a customer’s home to connect the appliances to a gas or water line. In these cases, once the lines are in place, they turn on the gas or water and check for leaks. Home appliance repairers also answer customers’ questions about the care and use of appliances.

When problems with home appliances occur, home appliance repairers visually inspect the appliance and check for unusual noises, excessive vibration, leakage of fluid, or loose parts to determine the cause of the failure. Repairers disassemble the appliance to examine its internal parts for signs of wear or corrosion. They follow service manuals and use testing devices such as ammeters, voltmeters, and wattmeter’s to check electrical systems for shorts and faulty connections.

After identifying problems, home appliance repairers replace or repair defective belts, motors, heating elements, switches, gears, or other items. They tighten, align, clean, and lubricate parts as necessary. Repairers use common hand tools, including screwdrivers, wrenches, files, and pliers, as well as soldering guns and tools designed for specific appliances. When repairing appliances with electronic parts, they may replace circuit boards or other electronic components.

When repairing refrigerators and window air-conditioners, repairers must take care to conserve, recover, and recycle chlorofluorocarbon (CFC) and hydro chlorofluorocarbon (HCFC) refrigerants used in the cooling systems, as is required by law. Federal regulations also require that home appliance repairers document the capture and disposal of refrigerants.

 

 

Repairers write up estimates of the cost of repairs for customers, keep records of parts used and hours worked, prepare bills, and collect payments. If an appliance is still under warranty, self-employed repairers will talk with the original appliance manufacturer to recoup monetary claims for work performed.

Work environment. Home appliance repairers who handle portable appliances usually work in quiet and adequately lighted and ventilated repair shops. Those who repair major appliances may spend several hours a day driving to and from appointments and emergency calls. Repairers sometimes work in cramped and uncomfortable positions when they are replacing parts in hard-to-reach areas of appliances. Repairer jobs generally are not hazardous, but workers must exercise care and follow safety precautions to avoid electrical shocks and gas leaks, and prevent injuries when lifting and moving large appliances.

Home appliance repairers usually work with little or no direct supervision. Many home appliance repairers work a standard 40-hour week, but may work overtime and weekend hours in the summer months, when they are in high demand to fix refrigerators and window mounted air-conditioners. Some repairers work early morning, evening, and weekend shifts and may remain on call in case of an emergency. Therefore, if you need someone to fix your toaster, dryer, Refrigerator, or any appliance you have, repairfinders.com can help you find someone today! Jack is over and out.

 

 

Information is from http://www.bls.gov/oco/ocos193.htm

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings
Pages: 1 (1 - 3 / 3)