Jump to 0 top | 1 navigation | 2 content | 3 extra information (sidebar) | 4 footer | 5 toolbar


Content

Find the perfect person to paint the interior or exterior of...

Paint Types in House Painting

Choosing your paint is probably the most important thing you will do on your project. This is because most paints are designed for a specific purpose. Primer paints are designed to adhere to raw surfaces and then to stick to a protective coat over the top of it. In general, there are four types of raw surfaces that you might want to paint over, wood, masonry, drywall, and bare metal. You should be able to find a primer that will work on your bare surface. Do not be tempted to simply skip the primer coat as finish paints will sometimes not stick well to the surface, especially metals.

The big question for many painters is whether they should use oil or water based paints. Glossy oils tend to be more impermeable to water and will bubble up if the surface beneath is damp. Latex and other water based paints will make wallpaper peel. Industry experts have argued for a long time over which formula is better in general. For exterior applications, water-based paints have the upper hand. Besides allowing the house to breathe, they tend not to crack as readily. In addition, they have the great advantage of water clean up. In addition, if you are worried about the ultimate environmental impact, water-based paints tend to be friendlier to the eco-system. Oil paints usually have a stronger and more overpowering odor. You should always ventilate well when painting, but it will seem even more vital with oil-based paints.

Even so, oil is often the choice to make, especially when painting over a surface that was previously painted with an oil base. If you simply must use a water-based paint over an oil-based paint, you should sand down the finish then prime it so that the paints will adhere to each other.

Although the price is not always the best indicator of quality, it does serve as a good general guideline. Also, the warrantee on paint will indicate how long it is likely to last. Remember that even inexpensive paint is relatively cheap when compared to the amount of time it takes to apply it. Better to have a durable paint that lasts a few extra years than a cheap one that gives out in less than five years.

Pigments in paints also make a difference. Cheaper paints often have cheaper pigments, so they tend not to cover as well, requiring more than one coat. Here again labor is a factor. Two coats of a paint that costs you half as much, is really only doubling your labor. Yellows tend to be the fastest fading color. Titanium dioxide is reported to be the best pigment. If you are buying an expensive paint, be sure to check the can for this ingredient.

Solids are included in paints to thicken the coating. It is calculated as the percentage of the paint that finally adheres to the wall. Solids generally run more than 40 percent of the paint. Higher than 45 is considered good. Do not look for this item on the can, as it is not usually on the label. The solids and pigment are held together with binders. In an acrylic paint, you will want to have all-acrylic binders for exterior paint. For interior paints, this factor is not as important.

Oil and acrylic will both cover most exterior surfaces, but stucco is a special case. Be sure to use an elastomeric paint, which continues to cover small cracks that can develop. Old aluminum siding can be painted. The old paint should be removed and a coat of latex primer and an additional coat or two of exterior paint can then be applied for an acceptable and durable finish.

When you go into the paint store, you will be confronted with flat, satin, and glossy paints. You should use flat for general background surfaces that are not subject to much wear and tear. Satin is better in bathrooms and kitchens where you would like to be able to clean the surface repeatedly over the years. Glossy paints accentuate a surface and bring people’s attention to it. It also tends to be easier to wipe clean. Use glossy paints on cabinets, banisters, some molding and places where little fingers are constantly smudging. Remember, though glossy paints are easier to clean, they tend to show imperfections in wood, drywall, etc.

It probably goes without saying that you should use exterior paints outside and interior paints on the inside. The fact is that exterior paints are designed to be more durable in the elements and interior paints are designed to adhere better to surfaces commonly found indoors. Recent years have brought about advancements in eco-friendly paints with zero or low VOCs. These are worth checking into especially for those who have health concerns or who frequently work with paint.

If you are looking for a hardworking, reliable, and trustworthy person to paint the interior or exterior of your home, the only place to search is on Repairfinders.com. On this site it will only take you a couple of minutes to find a qualified professional in your area who is more than happy to paint your home, quickly, efficiently, and for a reasonable price. For all your repair needs there is only one place to go, and that is Repairfinders.com

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings

DIY or call a professional? (The facts about Auto body work)

Do it yourself Auto bodywork was taken from: http://www.helium.com/items/1086080-auto-body-repair-and-repainting. It is a brief overview of how to do auto body work, yourself. It takes a lot of time, patience, and will power to get this done. Not everyone was made to do this on their own, so if like me you slightly cringe to the thought of having to fix your car up yourself do not worry. There is hope for us on repairfinders.com!

If one were to consider in doing-it-yourself auto body repair, you should have some basic interest in working with metal sheets. To do this kind of metal working the basic tools needed to repair dents and small rust holes are:

1. Ball peen Hammer

2. Rubber Mallet

3. Metal dolly

4. Tinsmith’s Spoons

5. Wire brush, steel or bronze

 

 

Working on dents does not necessarily mean hammering the body part to its original shape. All that is needed is to work back the dent to about at least 1/8 of an inch to its original shape. Making it shape to almost original will be completed by applying body filler and putty. In the process of gently hammering back the dent, paint will either chip-off or crack. It will be necessary to do the following:

1. Sandpaper away the paint and surrounding areas up to about 2 inches away from the exposed metal. Try to “feather-off” the paint meeting the bare metal to allow proper adherence of the body filler to be applied. Use 120 grit sand paper for this. Wet sanding is advisable then wipe thoroughly dry.

2. Dab the exposed metal with rubbing alcohol or anti-rust compound. Make sure to avoid applying it on the painted area.

3. If rust is evident, use steel brush or bronze brush to remove, if possible, all traces of rust.

4. It is at your option to thinly hand paint with primer the bare metal if it is not larger than the size of your palm.

5. Let the area dry completely before applying body filler. If you are a beginner, most body fillers come in two parts. The hardener, usually in a small plastic tube, is the catalyst to harden the compound. Use it sparingly because using too much will cause the filler to harden real fast in a couple of minutes. Mix the compound well and apply with gentle pressure in one direction to fill the depression on the body. Apply the filler close to the nearest undamaged paint.

6. After the body filler has hardened and dried wet sand gently with 320 grit sand paper to follow the contour of the body. Make sure that the body filler feathers where it meets with the original paint. Feathering means there is no ridge felt when you run your fingertips on where the ends meet. It takes time to be accurately sensitive to feel this difference to the touch. Running over the ends several times with your closed palm and fingertips will give you the “feel”.

7. To complete the filling, apply very thinly, glazing putting over the body filler to cover slight imperfections and pores. Again wet sand with 600 grit sand paper the entire area that you worked on. Overlap slightly sanding on the original paint. Let dry completely.

8. Apply primer surfacer spray (available in aerosol cans) with a color closest to your original paint. After the primer has completely dried, wet sand again with used 600 grit sand paper or new 800 grit sand paper. Wipe and let dry completely.

9. Apply paint color of your car from four to six coats letting each coat dry completely before applying the next coat. If the color code of your paint is available, normally you can get them too in aerosol cans.

10. After the final coat has completely dried, wet sand the finish very lightly with 1000 grit sand paper.

11. To bring out the sheen and luster of the paint job and blend it to the original, rub the entire work with fine rubbing compound with consistent light pressure strokes. Wipe off the repaired area and buff with circular motion.

Tips on Spray Painting:

NOTE: Know if your original paint is enamel, lacquer or acrylic. NEVER apply acrylic over enamel or lacquer finish. Enamel or lacquer over acrylic is just fine.

Mask off areas not to be painted.

Hold the spray about eight to ten inches away from the area.

Spraying motion should be back and forth overlapping each stroke by about 1/3 of its width.

Spray stroke speed should be close to 1 foot per second but not faster.

Release trigger or button away and past the work area if you need to stop or pause.

If a mistake or error was made and defect shows on paint applied, let dry completely then wet sand area with 1000 grit sand paper. When dry, resume painting finish.

To add shine and luster protect color, you can spray a clear coat to the last color coat.

 

 

Now all of this is fine and dandy, but if you are like me and now you might screw your vehicle up more, make a smart decision, and go to repairfinders.com. On repairfinders.com you can browse through dozens of custom auto body shops in your area. Get a real professional to do this heavy-duty job for you. In addition, the great thing about repairfinders.com is that you know you are getting only THE BEST in the business, as we only host honest, hardworking, reliable businesses and individuals. If you are ready to see a major improvement in not only your car, but also other everyday things, check it out today. In fact, I am going to hop on right now, and see if I can find someone to do something about these hairline scratches on the back of my car.

 

 

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings
Pages: 1 (1 - 2 / 2)