Jump to 0 top | 1 navigation | 2 content | 3 extra information (sidebar) | 4 footer | 5 toolbar


Content

A couple of things to think about before you start remodelin...

If you are thinking about remodeling your home or office, there are many things to consider. One of the biggest is “should I do it myself?” There is no easy answer to this question, but you can help yourself decide by considering the following questions:

1. Do I have the time?

Remodeling can take a considerable amount of time, even for the experts. Most of the time remodeling is actually more difficult than new construction. One of the reasons for this is that you have to prepare the existing components of your structure to blend in with the new.

2. Do I have the know-how?

Your remodeling project will likely require some specific skills to ensure a successful result. These can include carpentry, painting, drywall finishing, flooring, plumbing, electrical, concrete work, excavation, etc. You’ll want to carefully assess your abilities in the skills you’ll need for your own project.

3. Do I have the tools and equipment needed?

Since so many skills are involved, most property owners do not have the needed tools and equipment. If you can get the tools by purchasing, renting or borrowing them, do you have the skills to use them effectively and safely?

4. Do I have enough help?

Remodeling can be very labor intensive; two hands are often not enough. You can always use someone to help carry materials or equipment, or you might need skilled help in order to complete the job in a reasonable time. If you need help, will you have access to the kind of help you need, when you need it?

5. Am I physically able to do the work?

Remodeling is usually strenuous work, involving climbing ladders, working on scaffolds or heavy lifting. You’ll need to decide if you’re physically able to do that kind of work for the extended period your project may take.

6. Do I have a clear idea of what I am trying to accomplish?

Can you draw the necessary building plans, or will you need to get someone else to do this for you? You may need to hire an architect if your remodel is very complex. An architect can help with traffic flow and other factors that may arise when you change rooms, or move walls and doorways.

7. What is my budget?

You should make a careful estimate of all the costs of your project before any work is started. Calculate the costs of all materials, equipment rental, tools, labor, subcontractors etc. Don’t forget to add a budget for any unknowns or surprises that may be revealed later!

8. What kind of subcontractors am I going to need?

You will probably need some skilled subcontractors to perform specialized work that you can’t do. Do you have the time to deal with those subcontractors personally, and do you have the knowledge needed to negotiate with them? If you are unprepared in this area, it can cost you a lot later on.

You may decide when you’ve finished answering these tough questions that you’ll need some help. If you decide to hire a professional remodeling contractor, you should expect someone with years of experience in construction who can provide all the services listed above, including management of all the necessary subcontractors. Your contractor should take care of everything, and manage your project until it is completed in a timely and efficient manner.

Here’s how to find a good remodeling contractor:

1. Go to Repairfinders.com

On Repairfinders.com you will find only the best qualified professionals in your area. All it takes is a couple minutes of your time to find the right one that is best for you.

2. Check out references

Get previous customers’ opinion of the contractor and the work that was done. Talk to local vendors and suppliers to see if that contractor pays his or her bills.

3. Is the contractor local?

Does he or she have a local office, address or phone number? It’s easier to keep track of a local contractor; avoid hiring from out of town or state unless you thoroughly check them out.

4. Look at the contractor’s work

Make sure you look at previous projects or photos of completed work.

If you’re looking for someone who has roots locally and is likely to be around to stand behind the work done on your project, you might also find out if the contractor you’re considering is involved in the community or in non-profit organizations, or provides support for community projects.

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings

The magic of Television…

The television set has been and will continue to be the hub of the American home entertainment system for some time. Emerging technologies and expanded programming have driven consumers to purchase television sets with more features and at a higher cost. Knowing how to make a few basic repairs to your own television set can save you the time and money of consulting a professional over a simple problem, and even protect you from the unnecessary purchase of a new set.

However, home repair enthusiasts, experienced or otherwise, should note that television sets contain dangerously high voltages (more than 30,000) and even “quick fixes” should not be handled lightly. When making any repairs, wear safety glasses and work gloves at all times.

One of the most common malfunctions in cable televisions is a blurred (or snowy) picture. Most often, a flaw in the coaxial cable connecting the TV (or VCR) to the cable antenna causes this: the wiring itself may be flawed or the fitting may be loose. To determine if this is the case, turn the television on and wiggle the coaxial cable where it enters the television and where it enters the cable output. If the snow on the screen wavers (gets better or worse), you know there is a problem with the cable. In addition, you can try using the same cable on another television in your house. If it produces a snowy picture there also, you know there is a problem with that cable. Replacing the cable is inexpensive and easy: they can be found in the electronics section of most department stores and hardware stores in a variety of lengths and colors. Be sure to properly dispose of the flawed cable.

Another common malfunction that occurs in television sets is blotches of color, which may be particularly apparent around the edges of the screen. This can happen if the television screen becomes magnetized, which will occur if the television is placed near other electronic equipment, such as stereo speakers. While most televisions contain a circuit that will automatically de-magnetize the screen, this circuit may be damaged or otherwise malfunctioning. To de-magnetize the television yourself, you will need to purchase a strong magnetic coil: these can be found at most hardware stores. Hold the coil in the upper left hand corner, a few inches away from the screen (a rainbow pattern should appear on the screen). Making small circular motions move the coil around the screen, (the rainbow pattern should fluctuate). Increase the size of your circular motions until you have covered the entire screen and then slowly back away from the television set, continuing to make circular motions. When the coil loses contact with the screen, the blotches of color should be gone. In order to successfully de-magnetize the set, you may need to repeat these steps several times.

 

 

Replacing a television speaker that emits static noise can be simple, but requires caution because it entails removing the back cover of the television set, exposing the high voltage lead that runs into the top part of the picture tube. Even if the television is unplugged, the tube can shock you: do not touch it in any way. You will also be required to purchase a replacement speaker, which needs to match your current speaker in impedance, which will usually be indicated on the magnet. Begin by unplugging your television and laying it, screen down, on a soft surface. Remove any screws (usually Phillips head) from the back of the television shell. Then, pull back on the cover; if you feel resistance, you may have missed a screw or the cover may have snagged on one of the set’s internal wires. Carefully remove these obstacles and set the cover aside. Identify the malfunctioning speaker (whichever one usually emits static noise), and replace it with the new one. Reattach the speaker in the same manner the old one was attached. Replace the television cover and attach with screws. Important: During this process, it is very important to make sure none of the internal wiring of the television is jarred, twisted, or broken. Any damage to these components can irrevocably impair the function of the set.

If your television set has, a tendency to shut off randomly, it is probably overheating. Permanently remove any objects placed on or too close to the television’s ventilation slats. Use a small vacuum attachment to remove any dust that has built up there. This should successfully prevent your television from randomly shutting off again.

 

 

These four techniques will cure 50% of the problems that ail your television set, saving you time and money. If using these techniques does not work for you or if you feel unsure in performing any of them, a professional television repairperson should be contacted. Ask for an estimate and a realistic appraisal of whether the set can be adequately fixed. If not, it may be time to shop around for a newer model.  This is a wonderful way to fix your TV yourself, but if you are like me and don’t have much time on your hands, or you just don’t think you can do it. Find a professional on Repairfinders.com with dozens of listings in your area, finding the right man for the job will be a breeze!

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings

DIY or call a professional? (The facts about Auto body work)

Do it yourself Auto bodywork was taken from: http://www.helium.com/items/1086080-auto-body-repair-and-repainting. It is a brief overview of how to do auto body work, yourself. It takes a lot of time, patience, and will power to get this done. Not everyone was made to do this on their own, so if like me you slightly cringe to the thought of having to fix your car up yourself do not worry. There is hope for us on repairfinders.com!

If one were to consider in doing-it-yourself auto body repair, you should have some basic interest in working with metal sheets. To do this kind of metal working the basic tools needed to repair dents and small rust holes are:

1. Ball peen Hammer

2. Rubber Mallet

3. Metal dolly

4. Tinsmith’s Spoons

5. Wire brush, steel or bronze

 

 

Working on dents does not necessarily mean hammering the body part to its original shape. All that is needed is to work back the dent to about at least 1/8 of an inch to its original shape. Making it shape to almost original will be completed by applying body filler and putty. In the process of gently hammering back the dent, paint will either chip-off or crack. It will be necessary to do the following:

1. Sandpaper away the paint and surrounding areas up to about 2 inches away from the exposed metal. Try to “feather-off” the paint meeting the bare metal to allow proper adherence of the body filler to be applied. Use 120 grit sand paper for this. Wet sanding is advisable then wipe thoroughly dry.

2. Dab the exposed metal with rubbing alcohol or anti-rust compound. Make sure to avoid applying it on the painted area.

3. If rust is evident, use steel brush or bronze brush to remove, if possible, all traces of rust.

4. It is at your option to thinly hand paint with primer the bare metal if it is not larger than the size of your palm.

5. Let the area dry completely before applying body filler. If you are a beginner, most body fillers come in two parts. The hardener, usually in a small plastic tube, is the catalyst to harden the compound. Use it sparingly because using too much will cause the filler to harden real fast in a couple of minutes. Mix the compound well and apply with gentle pressure in one direction to fill the depression on the body. Apply the filler close to the nearest undamaged paint.

6. After the body filler has hardened and dried wet sand gently with 320 grit sand paper to follow the contour of the body. Make sure that the body filler feathers where it meets with the original paint. Feathering means there is no ridge felt when you run your fingertips on where the ends meet. It takes time to be accurately sensitive to feel this difference to the touch. Running over the ends several times with your closed palm and fingertips will give you the “feel”.

7. To complete the filling, apply very thinly, glazing putting over the body filler to cover slight imperfections and pores. Again wet sand with 600 grit sand paper the entire area that you worked on. Overlap slightly sanding on the original paint. Let dry completely.

8. Apply primer surfacer spray (available in aerosol cans) with a color closest to your original paint. After the primer has completely dried, wet sand again with used 600 grit sand paper or new 800 grit sand paper. Wipe and let dry completely.

9. Apply paint color of your car from four to six coats letting each coat dry completely before applying the next coat. If the color code of your paint is available, normally you can get them too in aerosol cans.

10. After the final coat has completely dried, wet sand the finish very lightly with 1000 grit sand paper.

11. To bring out the sheen and luster of the paint job and blend it to the original, rub the entire work with fine rubbing compound with consistent light pressure strokes. Wipe off the repaired area and buff with circular motion.

Tips on Spray Painting:

NOTE: Know if your original paint is enamel, lacquer or acrylic. NEVER apply acrylic over enamel or lacquer finish. Enamel or lacquer over acrylic is just fine.

Mask off areas not to be painted.

Hold the spray about eight to ten inches away from the area.

Spraying motion should be back and forth overlapping each stroke by about 1/3 of its width.

Spray stroke speed should be close to 1 foot per second but not faster.

Release trigger or button away and past the work area if you need to stop or pause.

If a mistake or error was made and defect shows on paint applied, let dry completely then wet sand area with 1000 grit sand paper. When dry, resume painting finish.

To add shine and luster protect color, you can spray a clear coat to the last color coat.

 

 

Now all of this is fine and dandy, but if you are like me and now you might screw your vehicle up more, make a smart decision, and go to repairfinders.com. On repairfinders.com you can browse through dozens of custom auto body shops in your area. Get a real professional to do this heavy-duty job for you. In addition, the great thing about repairfinders.com is that you know you are getting only THE BEST in the business, as we only host honest, hardworking, reliable businesses and individuals. If you are ready to see a major improvement in not only your car, but also other everyday things, check it out today. In fact, I am going to hop on right now, and see if I can find someone to do something about these hairline scratches on the back of my car.

 

 

  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • No ratings
  • 0 ratings
Pages: 1 (1 - 3 / 3)